Open loop hall effect sensor electrical sensor
Get Latest PricePayment Type: | T/T,Money Gram |
Transportation: | Ocean,Air,Express,Land |
Payment Type: | T/T,Money Gram |
Transportation: | Ocean,Air,Express,Land |
Model No.: THK_BS5S6L-S1
Place Of Origin: China
Use: Electronic
Coil Structure: Toroidal
Product introduction: | Application: |
Ø Power supply: +5v DC; Ø Hall effect principle - Open Loop Current Sensor; Ø The internal circuit adopts programmable chip packaging technology; Ø The primary and secondary of the current sensor are insulated and can measure DC, AC, pulse, etc; | Ø Ø Hybrid electric vehicle Ø Application on Inverter Ø UPS uninterruptible power supply Ø Electric vehicles and multi-function vehicles |
Electrical characteristics:
Parameter | Symbol | THK100 BS5S6L-S1 | THK200 BS5S6L-S1 | THK300 BS5S6L-S1 | THK400 BS5S6L-S1 | THK500 BS5S6L-S1 |
Rated current | IPN(A),RMS | 100 | 200 | 300 | 400 | 500 |
Measuring range | IP(A) | 0~±300 | 0~±600 | 0~±900 | 0~±900 | 0~±900 |
Output voltage | VO(V) | 2.5±0.625*IP/IPN | ||||
Insulation voltage | VC(V) | +5V DC±5% |
General parameters:
Project | Condition | Date | Unit |
|
Accuracy XG | @ IPN,T=25℃ | <±1.0 | % |
|
Accuracy XG | @ IPN, -40℃<T<125℃ | <±3.0 | % |
|
Offset voltage VOE | @ IP=0,T=25℃ | <±20 | mV |
|
Voltage offset temperature drift VOT | @ IP=0,-40~+125℃ | <±0.2 | mA/℃ |
|
Hysteresis offset voltage VOH | @ IP=0,after 1*IPN | <±5 | mV |
|
Linearity εr |
| ≤1.0 | %FS |
|
Load resistance RL |
| >10 | kΩ |
|
Capacitive load CL |
| 1~10 | nF |
|
Minimum output voltage VSZ | VC=5.0V | 0.24~0.26 | V |
|
Maximum output voltage VSZ | VC=5.0V | 4.74~4.76 | V |
|
Output internal impedance ROUT |
| 1~10 | Ω |
|
Operating bandwidth BW | -3dB | DC-30 | kHZ |
|
Working temperature TA |
| -40~+85 | ℃ |
|
Storage temperature TS |
| 55~+125 | ℃ |
|
Static power consumption IC |
| 15+Is | mA |
|
Product weight m |
| 65 | g |
|
Shell material | PBT material containing 30% glass fiber, flame retardant grade: UL94- V0; | |||
Standard | IEC60950-1:2001 EN50178:1998 SJ20790-2000 |
Structural drawing: (mm)
Connection diagram:
Remarks:
1. When the measured current passes through the primary pin of the sensor, there is a corresponding voltage signal output at the output end;(Note: wrong wiring may damage the sensor)
2. Products with different rated current can be designed according to the requirements of customers, and the output voltage of the sensor can be selected;
3. When the busbar is fully filled with holes, the dynamic performance is the best;
4. The temperature of primary conductor shall not exceed 100℃;
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.