| Payment Type: | T/T,Money Gram |
| Transportation: | Ocean,Air,Express,Land |
Model No.: THB_BP15D
Place Of Origin: China
Use: Electronic
Coil Structure: Toroidal
| Selling Units | : | Piece/Pieces |
| Download | : |
|
| Product introduction: | Application: |
| Ø Hall effect principle - Closed Loop Current Sensor; Ø The primary and secondary of the current sensor are insulated and can measure DC, AC, pulse, etc; Ø Power supply: ± 12V ~ ± 15V DC | Ø Application on Inverter Ø Ac/dc variable speed drive Ø Switching power supply (SMPS) Ø UPS uninterruptible power supply Ø Current monitoring and control of induction cooker |
Electrical characteristics:
| Parameter | Symbol | THB50 BP15D50 | THB100 BP15D50 | THB200 BP15D100 | |
| Rated current | IPN(A)，RMS | 50 | 100 | 200 | |
| Measuring range | IP(A) | 0～±150 | 0～±200 | 0～±300 | |
| Turn Ratio | NS(T) | 1000 | 2000 | 2000 | |
| Rated output current | ISN(mA) | ±50*IP/IPN | ±50*IP/IPN | ±100*IP/IPN | |
| Coil internal resistance | RS(Ω),@+75℃ | 30 | 50 | 50 | |
| Measure resistance | RM(Ω),@+75℃,VC | [(VC-2.0V)/(IS*0.001)]-RS |
| ||
| Working power supply | VC(V) | ±12V～±15V DC±5% |
| ||
| Insulation voltage | VD(V) | 50/60Hz，1min，2.5kV；RMS |
| ||
General parameters:
| Project | Condition | Data | Unit |
| Accuracy XG | @ IPN,T=25℃ | <±0.5 | % |
| Zero offset current IO | @ IP=0,T=25℃ | <±0.2 | mA |
| Current offset temperature drift IOT | @ IP=0,-40～+85℃ | <±0.005 | mA/℃ |
| Linearity εr |
| ≤0.1 | %FS |
| Follow accuracy di/dt |
| >100 | A/µs |
| Response time tra | @ 90% of IPN | <1.0 | µs |
| Operating bandwidth BW | -3dB | DC-200 | kHZ |
| Working temperature TA |
| -40～+85 | ℃ |
| Storage temperature TS |
| 55～+125 | ℃ |
| Static power consumption IC |
| 15+Is | mA |
| Product weight m |
| 50 | g |
| Shell material | PBT material containing 30% glass fiber, Flame retardant grade: UL94-V0; | ||
| Standard | IEC60950-1:2001 EN50178:1998 SJ20790-2000 | ||
Structure diagram:（mm）
Connection diagram:
Remarks：
1，When the measured current passes through the primary pin of the sensor, there is a corresponding current signal output at the output end;(Note: wrong wiring may damage the sensor)
2，Products with different rated current can be designed according to the requirements of customers, and the output voltage of the sensor can be selected;
3，When the busbar is fully filled with holes, the dynamic performance is the best;
4，The temperature of primary conductor shall not exceed 100℃;
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Contact Now