Closed Loop Hall Current Sensor
Get Latest PricePayment Type: | T/T,Money Gram |
Transportation: | Ocean,Air,Express,Land |
Payment Type: | T/T,Money Gram |
Transportation: | Ocean,Air,Express,Land |
Model No.: THB_AP15D_Y
Place Of Origin: China
Use: Electronic
Coil Structure: Toroidal
Product introduction: | Application: |
Ø Hall effect principle - Closed Loop Current Sensor; Ø The primary and secondary of the current sensor are insulated and can measure DC, AC, pulse, etc; Ø Dual power supply operation: ± 9V ~ ± 15V DC | Ø AC/DC variable speed drive Ø Switching power supply (SMPS) Ø Welding power supply reference Ø UPS uninterruptible power supply Ø Current monitoring and control of induction cooker |
Electrical characteristics:
Parameter | Symbol | THB50AP 15D50Y1 | THB100AP 15D50Y1 | THB125AP 15D125Y2 | THB200AP 15D100Y1 |
Rated current | IPN(A),RMS | 50 | 100 | 125 | 200 |
measuring range | IP(A) | 0~±150 | 0~±300 | 0~±375 | 0~±600 |
Turn Ratio | NS(T) | 1000 | 2000 | 1000 | 2000 |
Rated output current | ISN(mA) | 50 | 50 | 125 | 100 |
Coil internal resistance | RS(Ω),@+75℃ | 31 | 45 | 31 | 45 |
Measure resistance | RM(Ω),@+75℃,VC | 0~RMmax=((VC-0.6V)/IS)-RS;IS=IP/NS(mA),See Note 1 | |||
Working power supply | VC(V) | ±9V~±15VDC±5% | |||
Insulation voltage | VD(V) | 50/60Hz,1min,3kV;RMS | |||
lightning surge | VW(V) | @ at1.2/50µs,<4.5KV |
Note 1: if power supply VC=15V,IPmax=150A,NS=1000T,RS=31Ω;Then the compensation current output by the product is IS=150mA,
In order to make the product test to 150A, the maximum sampling resistance RMmax=(15-0.6)/0.15-31Ω=65Ω;
General parameters:
Project | Condition | Data | Company |
Accuracy XG | @ IPN,T=25℃ | <±0.5 | % |
Zero offset current IO | @ IP=0,T=25℃ | <±0.2 | mA |
Current offset temperature drift IOT | @ IP=0,-40~+85℃ | <±0.005 | mA/℃ |
Linearity εr |
| ≤0.1 | %FS |
di/dt |
| >100 | A/µs |
Response time tra | @ 90% of IPN | <1.0 | µs |
Operating bandwidth BW | -3dB | DC-200 | kHZ |
Working temperature TA |
| -40~+85 | ℃ |
Storage temperature TS |
| 55~+125 | ℃ |
Static power consumption IC | @±15VDC | 12+Is | mA |
Secondary pin Recommended mounting hole size | Pin(+,-,M) | >1.2 | mm |
Product weight m | 1000T | 19 | g |
2000T | 21 | g | |
Shell material | PBT material containing 30% glass fiber, Flame retardant grade:UL94- V0; |
Structure diagram:(mm)
THB_AP_D_Y1 | THB_AP_D_Y2 |
Connection diagram:
Remarks:
1. Connect the current according to the calibration direction of the wiring diagram; Pay attention to the positive and negative current;
2. Wiring according to the definition of the calibrated functional pin in the structure diagram;
3. The temperature of primary conductor shall not exceed 100 degrees;
4. When the busbar should be fully filled with primary perforation, the dynamic response and di/dt follow-up accuracy are the best;
5. The above specifications are calibration specifications, and our company can customize products according to customers' requirements.
6. If there are new changes to our products, please do not notice otherwise, and the actual product parameters shall prevail;
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.